PRODUCTS

TILE ADHESIVE - Gold


Mega Crete Tile Adhesive

Polymer modified cementitious Mega Crete Tile Adhesive is cement based general tile adhesive.

It contains highest grade of graded sand, cement, selected fillers, polymers and chemical additives to give it unique properties.

Gold: Higher grade of water resistant tile adhesive suitable for Vitrified, Marbonite wall and floor application.

Gold - Type I : Higher grade of water resistant tile adhesive suitable for Vitrified, Marbonite wall and floor application.

 



Details

  • Excellent bonding to the base plaster / concrete even at a thickness of 2 mm
  • No need for hacking
  • Water resistant
  • Can be used on new as well as old walls and floors

Application Procedure

  • Clean loose particles, dirt, grease and traces of foreign material from the surface, if necessary by using wire brush/sand paper or by chipping.
  • For loose plaster areas, remove the defective material and re -plaster the area with Mega Crete Ready-Mix Plaster.
  • For floors/ walls, which are not even, re-plaster with Mega Crete Ready-Mix Plaster to make them even.
  • New Construction: Before tiling the new construction should be cured for 6 weeks.
  • Old Construction: Remove all loose portions and make good with sand cement slurry bonding coat prior to apply Mega Crete Ready-Mix Tile Adhesive.


Specifications


Approximate Water Demand
SILVER 40kg - 10 to 11 liters | 20kg - 5 to 5.5 liters
GOLD 20kg - 5 to 5.5 liters
PLATINUM 20kg - 6 to 6.5 liters


CONTACT
Tile Adhesive Details Application Procedure Specifications